Our full technical support staff does not monitor this forum. If you need assistance from a member of our staff, please submit your question from the Ask a Question page.


Log in or register to post/reply in the forum.
Question/Topic Posted By Replies
Does CRBasic Editor support code-folding? What alternative IDEs can I use to write CRBasic apps? Minh T. 0
RAD06 and temperature/HR probe compatibility. marlon.calispa 2
Using Vaisala HMP60 with CR6 over MODBUS texagg98 0
Time format in rtmc pro expression Makada 4
Power supply for small isolated stations. marlon.calispa 1
Aosong AM2302 Programming joe_sandia 8
Specify random sleep period before FTP upload ChrisA 1
Reading frequency on a cr800 garryl 2
Count Occurrences Within Time Interval Terrapin 1
Winddirection from max windspeed Makada 2
No data to read with a well working setup - PC200W/CR10X/K-thermocouple Ada 13
24 hour Max and Min expressions in RTMC Clayton 6
Wind Direction from Serial Thies sensor TimoRoth 9
External & internal data storage Jamal 3
Measure water conductivity in microsiemens John Butnor 4
CR1000 DATA LOGGER with HIGH TEMP SURFACE PROBE Bushry 1
Random instruction problem GAG 3
Show us your script. Makada 1
using split string to break apart parens-delimited data string cedgar 2
Nortek Aquadopp Profiler NMEA readings heiko 10
Public file LGS 6
Sending and receiving binary data including null bytes jonny 2
Cr 1000 resets, but does not allow program to continue uninterrupted. HKing 6
Integrating Raspberry Pi Camera Module bbolton2 1
Rainrate mm/h Makada 5
Powering the CR9000X with two CR9052IEPE modules and 12 channels in use for fieldwork Ema2017 1
Naming problem with "TableFile" instruction eddy-covariance Chakir 3
Dataloggers, ports and probes marlon.calispa 1
Timestamp personnal format in Datatable Otemohu 2
File rename Ponce 7