Our full technical support staff does not monitor this forum. If you need assistance from a member of our staff, please submit your question from the Ask a Question page.


Log in or register to post/reply in the forum.
Question/Topic Posted By Replies
CR1000X - Error Codes XMPG 2
Enable and disable 8 ports of the SDM-CD16 device, SDMCD16Mask instruction. Enripsc 2
Reading data from Modbus RTU device (Kamstrup Multical 603) with CR6 logger ipantev 0
CR1000X Datalogger - Reading from SD Card for FTP Streaming Shreeshant 4
Additional Pulse Counters BertSP 6
CR300 Webserver ryan42 2
Connecting to CR1000 logger bweeding 1
TMAS T61-EHS5 3G modem / Gateway rmorris 1
Change TIMESTAMP in data table outputs MAQS017 1
Cr10x losing connection embayweather 1
Connect Young 05103 wind sensor to Cr1000 fmr2007 3
SunHrs Makada 4
Voltse() and The voltage range kokihualpa 1
Configuring CS3000 with Cell 205 dmcairns 2
META DATA osvaldojose 2
Can't connect to my Datalogger outside local network ACHBANI Hamza 1
Kepserver OPC nirubutu 1
CR1000X Datalogger - Posting Data to Server using Ethernet Shreeshant 2
CSD modem connection issues artyb 13
Davis anemometer pulse count function Benjamin.vial 3
PPPOpen() Issue ryan42 8
Vaisala HMT110T Temperature Sensor with RS485 Output / CR1000X Issues MattB 1
Struggling getting an Ultrasonic Anemometer (GILL), option 4 (thus SDI12) working on a CR1000 DataLogger MM81 2
CR300 / 310 Error Code 7 static 2
Rating Lookup Table ZS 4
MetPackII -> MD485 -> CR1000 leea 2
extreme low values with HMP155 Paul Heinrich 1
optimizing packets IslandMan 8
scheduled collection keeps failing JimD 0
More than 32 reps on AVW200() DiegoM 1