Our full technical support staff does not monitor this forum. If you need assistance from a member of our staff, please submit your question from the Ask a Question page.


Log in or register to post/reply in the forum.
Question/Topic Posted By Replies
How to send hex string to contral a digital servo motor by CR1000 via RS232 Kony 2
RTMC /Pro select data source from dropdown? artyb 2
Issue of connecting AM16/32B to CR23X Anil_89 2
CR6 - issue with Mobile Data Assistant kernow 3
Array in If condition LsxSaf 5
Landline modem reset string artyb 3
reading binary data from serial port pfjessen 0
dropbox sync to-ya farm 3
CR310 OS10.03 ConstTable not showing Simgag 1
programacion de CR1000 a AVW1 RafaMM 3
LoggerNet 4.6_Connect_Table Monitor->RecNum to-ya farm 0
LoggerNet 4.6_Connect_can syn between server time and station time cause CRX1000 malfuction? to-ya farm 0
strain gauge bobby 1
Modem to CR1000X via RS-232 argo 1
Re: Sending data to Rest API platform with CR1000X logger. setec@setec.cl 1
Cellular Diagnostic CR300 : Need Help : Nicolas 0
Serial instrument communications Viridius 0
ViewPro: Saving Imported CSV file as DAT file rmorris 1
CR310 GPRS and Ethernet ErnestoRivera 0
CR1000 two GSM re-connection problems smeck 0
Public variables with limited communication bandwidth MortenS 3
Radio Channel Mask - RF407 XMPG 0
NetworkTimeProtocol to synchronize datalogger Benjamin.vial 7
CR300 & ModBus RTU 485 Sensor Nicolas 3
CallTable position Makada 3
SMSSend Dams 4
Transmit data from CR1000 to computer using Xbee JimmyXu 3
Upgrade SO to CS655 w/o A200 smile 2
CR300-CELL215 network operator locked julien55 3
RS232 - RS485 Cable & Pinout Modbus Nicolas 1