Our full technical support staff does not monitor this forum. If you need assistance from a member of our staff, please submit your question from the Ask a Question page.


Log in or register to post/reply in the forum.
Question/Topic Posted By Replies
measuring current/amps on a shunt AMK 6
SDI12-sensor + MUX on CR300 ? Rabah DJEDJIG 5
CR6 SFTP francesco.sabatini 2
delete a file on card using crbasic code maurixio 1
Gill Windmaster Pros with CR1000X Justin R 3
CR6 program bilge pump Paul W. 1
ACPower Instruction in CR6 doesnt measure current XxVashxX 2
Resending files via FTP / deleting oldest file geometrikal 6
any way to measure a 0 - 5 v sensor? w cr6? Shanks.J 3
Compiler crash with structure elements in datatable Chasper B. 0
Connect 5 PT100 sensors to a CR1000X datalogger through an AM16 / 32B Fadvis 3
CR1000X I2C Communication? Not even showing up in CRBasic Editor Waq 9
No response from modbus sensor when reading it after other modbus sensor [CR1000X] Italo_ 2
execute matlab .m with loggernet TaskMaster AMK 4
4-20mA HART communications.... Marc W. 0
skyvue report laser run time has been exceeded chengchen 0
TableFile and TDR100 gordi 2
How to measure a current loop. crack meter. looping 4-20mA as wire continues to extend Shanks.J 0
Option 64 and scheduled downloads tchill 2
CR1000X USING PortGET error ykzhao 0
Download older version of DevConfig utility supporting windows XP niksteiak 3
"file is remote/inaccessible or does not exist" redux Delta1 1
CR1000X Datalogger - Example code to use a GSM Modem with the datalogger Shreeshant 4
Datatable name as a variable? NLA_MV 2
Remote CRVW3 via IP smile 2
SMS Alert Nichol 1
Underwater Camera JonDUSACE 0
Changing Station Name MPPMC 6
Boltek EFM and CS Logger AJ Meyer 0
LNDB data not going to database brf11 2