Our full technical support staff does not monitor this forum. If you need assistance from a member of our staff, please submit your question from the Ask a Question page.


Log in or register to post/reply in the forum.

CFCC with CR300 - setup roadblock and no image transfer


Steve Nov 9, 2022 03:46 PM

Hi,

Following the manuals and hitting a roadblock on set up.   I'm not seeing a USR for the CR300 either in Device Config Utility or Loggernet. Image size is adequately small.

Cheers,


JDavis Nov 9, 2022 05:00 PM

CR300 is not able to configure a USR drive(not enough RAM).

You will need to write images to CPU drive instead. The CPU drive on the CR300 has a lot more endurance than the CPU drive on older loggers, so frequently saving images to it is not a concern.


Steve Nov 9, 2022 05:24 PM

Thanks JDavis

Log in or register to post/reply in the forum.