Our full technical support staff does not monitor this forum. If you need assistance from a member of our staff, please submit your question from the Ask a Question page.


Log in or register to post/reply in the forum.

CR1000 to RJ45 Ethernet connection


Miguelxd Nov 10, 2022 05:43 PM

I have a CR1000 in a rural area where the usual modem we use doesnt work, as this place is very remote.

The short-term solution we have is to buy a 4g modem that works great on remote areas but it only have an Ethernet RJ45 port.

Would this connection: CR1000-RS232 --> RJ45-Modem work properly? 

I alredy have the RS232->RJ45 connector and the CR1000, but need to study the solution before buying the modem which is expensive and the only option available here.

Thanks for your time.


JDavis Nov 10, 2022 08:30 PM

You need a NL121 or a NL201.

The RS232 to RJ45 cable is just a physical adapter. It does not give the datalogger an Ethernet connection.

Log in or register to post/reply in the forum.