Our full technical support staff does not monitor this forum. If you need assistance from a member of our staff, please submit your question from the Ask a Question page.


Log in or register to post/reply in the forum.

Sharing connection throught Ethernet port

YoanB Mar 26, 2025 10:41 AM

Hi everyone.

I have a CR310-Cell with a 4G connexion.

I would likke to share this connection over the ethernet for an instrument that is independent of the CR but requires an internet connection.

I have already set the ethernet port to "Always ON" and the router option to "True" in advanced tab settings.

Now, I need to add the line configuration to my program to forward the connection.

Does ModbusClient() command allow to configuring thos connection sharing ?

Thank's for you help.

JDavis Mar 26, 2025 02:58 PM

The data logger does not have IP routing capability.

Recommendation is to program the CR310 to read the desired values from the other device. Then store the values in the CR310 in a way that can be collected.

YoanB Mar 31, 2025 06:44 AM

We need a distant acces to our Trimble Alloy. So collect isn't enougth for us.

Thank's for reply.

Log in or register to post/reply in the forum.