Our full technical support staff does not monitor this forum. If you need assistance from a member of our staff, please submit your question from the Ask a Question page.


Log in or register to post/reply in the forum.

Cr1000 streaming data to GOES

Jackson.Lopes Oct 18, 2016 02:07 PM

Hi.

Have you guys any CRBasic programm exemple which sends data to the GOES satelitte by using a CR1000? 

Best regards,

JDavis Oct 18, 2016 03:33 PM

There is an example program in the TX321 manual.

All you need to do is add the GOESData instruction to the datalogger program.

The GOESSetup instruction lets you configure the transmitter with the datalogger program, but isn't needed if you already configured the transmitter with DevConfig.

Log in or register to post/reply in the forum.