hello to everyone,
unfortunately I have a problem in reaching remote loggers connected by radio to a main logger.
The main one is connected to LoggerNet via GSM modem, and it is perfectly accessible.
I have yet to understand, but I believe there is an interference between the GSM band and the 2.4 GHz radio band (radio between remote and main logger), but the question is another.
Since communicate with each other,via pakbus, I regularly receive the data tables,
and some of the numeric variables of the remote to the memory of the main logger,the question is can I program the remote loggers by sending the program file to the main logger?
Many thanks
Regatrds
Smile
Has the main logger (connected to the GSM modem) been setup as a router?
In the laboratory with the logger connected by wire, works fine, and via GSM I can also reach remote logger (numeric send program set clock, all well), but the main logger is not set as a router. In LoggerNet I setup I just set in cascaded the remote loggers to main.
In order to work, the setting to make the main logger a router will need to be set. It should then work after that.