Our full technical support staff does not monitor this forum. If you need assistance from a member of our staff, please submit your question from the Ask a Question page.


Log in or register to post/reply in the forum.

PPP connection with CR1000

novicok Nov 24, 2016 08:13 PM

Hello smeck

I think you have good experience with CR1000 data logger communication with GPRS. It was working as you wrote.

Could you send me usefull information. I want to solve this problem.

we are using of the next devices:

CR1000

CS105 interface

and Fastract xtend modem

I tried to make some steps forward for set up communication between these devices

I installed new OS of the data logger

I re-configure modem with AT commands

I re-configure CS-105 interface (i am not sure it is correct if you can give me more information about configuration)

I am using Static IP address

and in data logger what do we need re-configurate. Which parameters do we need to change.

best regards

* Last updated by: novicok on 11/24/16 @ 8:14 PM *
aps Nov 25, 2016 05:19 PM

Please see the two old manuals in this directory which are the last we prepared that covered use of that modem.  Some things, in particular the datalogger OS, may have changed since then:

ftp://ftp.campbellsci.co.uk/pub/csl/outgoing/support/

Log in or register to post/reply in the forum.