Hello,
i use a CR1000 in test mode in my office.
If i use an ethernet connection (like http://www.xxx.yyy.zzz/?command=NewestRecord&table=DataTableInfo) to the CR1000, i can see DataFillDays(1,1) = 167 days. DataFillDays(1,2) shows 0, but card is used.
The CR1000 in the field should send emails.
To build a message string, i use in CRBasic
s = "CR1000 card full in " + status.DataFillDays(1,1)+" days".
The result is: "CR1000 card full in 1.708184E-12 days"
Why?
The next Problem:
In CRBasic:
s = "CR1000 card " +settings.CardBytesFree/1024/1024 +" MB free"
No change over some days. After a logger reset, the correct value was read, but only once.
What it could be the problem?