Displaying 1 - 20 of 21 articles
Author: Nathanael Wright | Last Updated: 12/20/2023 | Comments: 1
In this blog article, I’ll share with you the next five tips (6 through 10) that you can use to help troubleshoot your radio frequency (RF) networks. This is the second article in our three-part series. If you missed my first article or want to...
read more
Author: Nathanael Wright | Last Updated: 10/31/2023 | Comments: 0
In this blog article, and the next two in the series, I’m going to share with you some tips you can use to help troubleshoot your radio frequency (RF) networks.
In large RF networks, it can be challenging to achieve reliable spread-spectrum radio communications. (For our...
read more
Author: Bruce Smith | Last Updated: 04/15/2021 | Comments: 2
Has an electrical surge or other event made you concerned that your COM port or short haul modem may not be operating properly? Do you know how to test for this? In this brief article, we’ll look at some simple tests you can perform to...
read more
Author: Carolyn Ivans | Last Updated: 10/23/2020 | Comments: 0
You may already know that you can add external data storage to your data logger with flash-memory cards. But do you know what kind of card you need—or if you even need one? In this article, I’ll answer these and other memory card questions. In...
read more
Author: Carolyn Ivans | Last Updated: 10/22/2020 | Comments: 5
You may use CompactFlash or microSD memory cards for external storage of your data logger data, but are you using your cards correctly? In this article, I’ll answer some common questions you may have about memory card usage. Recommended for You: If you haven’t done...
read more
Author: John Markham | Last Updated: 08/13/2019 | Comments: 0
Although there have been vast improvements in our ability to gather and use road-weather data, there are still, unfortunately, significant information gaps we must fill. In this blog article, we’ll look at the issues that hinder our current data acquisition and a solution for obtaining...
read more
Author: Nathanael Wright | Last Updated: 01/16/2019 | Comments: 2
Did you know you can monitor your data usage using CRBasic program code on our new data loggers with integrated cellular modems and our external Campbell Scientific brand of cellular modules? In this two-part series, I’ll first show you how to do this in the...
read more
Author: Robin Deissinger | Last Updated: 11/20/2018 | Comments: 1
When you think of a sunset, do you feel a bit sentimental? Perhaps a bit sad that a particular sunsetting device or piece of technology will soon become obsolete? Admittedly, that’s just the way things go. With a rapid succession of technological advancements, it becomes...
read more
Author: Gary Roberts | Last Updated: 08/21/2018 | Comments: 4
You may have heard us say that we live by the mantra “Measurements Matter.” We always strive to give you the measurement devices you need to make the most accurate measurements possible using leading-edge technology in a reliable, low-power solution. But, to be honest, good...
read more
Author: Steven Moore | Last Updated: 03/28/2018 | Comments: 0
You’ve carefully acquired good measurement data, and now you want to access your data without worrying about communication headaches. Cellular communication sounds like a great option, but you've heard that trying to obtain a data plan for your cellular modem can be frustrating. You don’t...
read more
Author: Gary Roberts | Last Updated: 02/21/2018 | Comments: 3
You may have heard about the new integrated cellular modem gateways available as options on some of our data loggers. But, do you know what these options really offer, and how they can help your data communication needs now and for decades to come? In...
read more
Author: Jacob Davis | Last Updated: 12/22/2017 | Comments: 0
Just recently, the KRACK (Key Reinstallation AttaCK) Wi-Fi vulnerability was publicized. You might be wondering what it is and how it affects the security of your Campbell Scientific devices and data.
The KRACK vulnerability exists in the WPA2 (Wi-Fi Protected Access II) security standard used on...
read more
Author: Timothy Jeppsen | Last Updated: 11/29/2017 | Comments: 0
What do expansion peripherals do, and how is integrating them helpful? Expansion peripherals have two purposes: to expand the capabilities of the data logger, both in channel count and functionality, and to improve measurement quality. What if we could provide both and make it easier...
read more
Author: Dana Worley | Last Updated: 04/05/2017 | Comments: 0
IP communication has significantly changed the way many of us access our data loggers. It is reliable, fast, and readily available—anywhere you have access to "the Internet," you have the ability to use this protocol to communicate with your data logger.
Sometimes, however, network access to...
read more
Author: Dana Worley | Last Updated: 01/25/2017 | Comments: 19
Have you had problems finding an SMTP server to use to send emails from your data logger? Are compatibility issues causing you to look for a work-around? Keep reading for a solution that may be just what you need.
Some Background
In 2006, we added the ability...
read more
Author: Dana Worley | Last Updated: 09/28/2016 | Comments: 2
We all remember the year 2000 as the year that The World As We Know It would come to an end. Computer systems were predicted to come crashing down on January 1, leaving in their wake failing infrastructure that would affect millions of lives. In...
read more
Author: Travis McKissack | Last Updated: 07/21/2016 | Comments: 0
When it comes to designing an RF (radio frequency) telemetry link, many people know that you need to ensure that there is an unobstructed line-of-sight (LOS) between the transmitting and receiving antennas. Unfortunately, many people don’t know that there is more to this seemingly obvious...
read more
Author: Sam Utley | Last Updated: 03/30/2016 | Comments: 4
While you may have no problem identifying which standard polarity RF connectors are pin (male) or socket (female), do you find it difficult to identify the gender of reverse polarity connectors? If so, don’t worry. You are certainly not alone. In addition to the gender...
read more
Author: Paul Smart | Last Updated: 09/02/2015 | Comments: 2
You may have heard of Modbus (a widely used communications protocol), but do you know why it is often used with Campbell Scientific data loggers? Do you know how to use Modbus for communication between your data loggers and other Modbus-capable devices? Modbus is just one...
read more
Author: Jacob Davis | Last Updated: 07/15/2015 | Comments: 0
Your data is valuable, and sometimes that value is reduced if unauthorized users have access to it. For this reason, Campbell Scientific data loggers have numerous methods of restricting access to your data. This article is an overview of four available methods for securing your...
read more
