Long-term, trouble-free protection for your datalogger
Overview
The FC100 is designed for use with the SG000 Strike Guard lightning detector as part of the CS110 and LW110 lightning warning systems. The SG000 outputs its data signal via fiber-optic cable, and the FC100 is installed at the end of the fiber-optic cable and before the datalogger. The FC100 converts a fiber-optic data signal into an RS-232 signal for a lightning-proof connection between the sensor and the datalogger.
The FC100 can also be used as an RS-232 link between two serial devices (datalogger to PC) separated by less than 328 ft (100 m). The FC100 is a DCE device, so a null modem cable is needed between it and a datalogger.
Read MoreBenefits and Features
- Lightning-proof and lightning-safe serial communication
- Robust design for long, trouble-free operation
- Instant termination without connectors, crimping, polishing, or epoxy
Technical Description
The FC100 is designed for use with the SG000 Strike Guard lightning detector as part of the CS110 lightning warning system. The SG000 outputs its data signal via fiber-optic cable, and the FC100 is installed at the end of the fiber-optic cable and before the datalogger. The FC100 converts a fiber-optic data signal into an RS-232 signal for a lightning-proof connection between the sensor and the datalogger.
The FC100 can also be used as an RS-232 link between two serial devices (datalogger to PC) separated by less than 328 ft (100 m). The FC100 is a DCE device so a null modem cable will be needed between it and a datalogger.
Images
Specifications
| Electrical Connector | 9-pin, D sub, DTE compatible |
| Baud Rates | 1,200 to 19,200 bps (at 100 m guaranteed with FC100CBL-L cable) |
| Power | 12 Vdc (via pn 14291 or pn 15966) |
| Current | 5 mA (average) |
| Mounting Holes | 7.62 cm (3 in.) apart |
| Case Width | 2.8 cm (1.1 in.) |
| Dimensions |
|
Compatibility
Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.
Dataloggers
| Product | Compatible | Note |
|---|---|---|
| CR1000 (retired) | ||
| CR1000X | ||
| CR200X (retired) | ||
| CR216X (retired) | ||
| CR300 (retired) | ||
| CR3000 | ||
| CR310 | ||
| CR350 | ||
| CR5000 (retired) | ||
| CR6 | ||
| CR800 (retired) | ||
| CR850 (retired) | ||
| CR9000X (retired) |
Additional Compatibility Information
The FC100 is used with the SG000 Strike Guard.
FAQs for
Number of FAQs related to FC100: 10
Expand AllCollapse All
-
Short-fiber runs sometimes pass too much signal. The solution is to pull the fiber part way out of the holding ferrule.
-
They provide lightning-proof and lightning-safe serial communication that eliminates the need for transient suppression devices.
-
The data transmission fibers are fragile and cannot be bent or broken. Consequently, the fibers need to be handled with care and protected inside a conduit (usually PVC).
-
The 12 Vdc power supply keeps the signal from dropping when large data packets are transmitted.
-
With a good signal strength, 1200 to 19,200 bps.
-
The FC100 provides instant termination—no connectors, crimping, polishing, or epoxy.
-
100 m (330 ft) with a 1.0 mm poly-methylmethacrylate (PMMA) core with a PVC or polyethylene jacket, simplex or duplex; up to 1 km with a higher-grade fiber.
-
Direct communication between two RS-232 serial devices, such as a PC to a data logger or a data logger to a serial sensor.
-
The FC100 is designed for lightning-proof and lightning-safe serial communication. Because the FC100 offers PMMA or glass fibers that are not conductive, electrical surges (such as those caused by lightning) cannot travel between the modems.
-
The FC100 is required to communicate with the SG000 Strike Guard Lightning Sensor. The SG000 is an option for the CS110 Electric Field Sensor and the LW110 Lightning Warning System.
Privacy Policy Update
We've updated our privacy policy. Learn More
Cookie Consent
Update your cookie preferences. Update Cookie Preferences