Our full technical support staff does not monitor this forum. If you need assistance from a member of our staff, please submit your question from the Ask a Question page.


Log in or register to post/reply in the forum.
Question/Topic Posted By Replies
CR1000 OS failed to update Samurai Japan 2
PulseCount low voltage NVen 2
way to overwrite actual record in a datatable? Chasper B. 2
LoggerNet stopped working properly on Windows Server 2019 (0xc0000142) Darwyn72 0
CS616 values are always 0.00 oabany 1
Inverting logic levels for serial communications on control ports Ty_Crawford 4
CR1000 APRS/CWOP cellectronic 17
Simulate Switch Closure Snohomish County SWM 2
I want to output NAN for a faulty sensor Darwyn72 3
StructureType Dams 2
Connect to CR1000 datalogger in PhoneBase mode Bia 8
AT commands to reconfigurate Modem COM 110 Jose Antonio 4
Communications Link with Station Fails with about 10% of the new OS transferred Richard T. Reynolds 0
GSM modem for sending 3000-4000 SMS/day Hancock82 2
Compiler warning for watchdog timer Minion signature triggered Eric Courtin 3
Penman-Monteith smile 4
Suitable cellular gateway for cr300 parthi 1
How to program the CR850 and CR 1000 to read only current (mA) Unilab 6
CR1000X ModbusServer() or ModbusSlave() What now? GNWCLZ 2
Configuring Data Logger For Serial Input/Output Quinton Kirsch 2
Sending current and "n" previous readings ludwigh 0
Thermocouple psychrometer on CR6 : TCPsyc DavidCo 3
Problem with CR6 and PC400 noele.leonardo 0
Limit Size of 2D Array saved in DataTable rstinst 0
How to configure in CR-BASIC RS-232 FOR ANEMOMETER Unilab 4
Vaisala WMT700 Sonic Anemometer with SDI-12 on CR1000X Logger gpswx4cster 0
Cell215 power uo once a week Pascal 4
TimeIntoInterval, even hour mystery! VMK 0