Our full technical support staff does not monitor this forum. If you need assistance from a member of our staff, please submit your question from the Ask a Question page.


Log in or register to post/reply in the forum.
Question/Topic Posted By Replies
Seeking Assistance: Issue with RM Young 81000 Anemometer and CR1000x Datalogger Diego Yabbur 1
PPPOpen and TCPOpen timeout MrMiglas 4
Callendar-Van Dusen coefficients (PRT sensors) artyb 1
Sdi-12 With Meter Group Instruments and CR1000X gpswx4cster 1
CR1000X LVTTL communication satoru 1
CR6 program with VibratingWire instruction could not compile after upgrading LoggerNet 4.6 to 4.7 Thein 5
configuring an NL241 when connected to a CR1000 Arizona 3
Using FTPClient with Modem SoilResearcher 9
Comment connecté un thermocouple K sur CR10X georges 6
Spike data from SP Lite2 (Pyranometer) Nichol 1
SDI12 Terminal Console (Free, Open Source and for Windows) JoEmbedded 2
CS655/650 wireless smile 2
IP WIFI relais smile 2
PSW12 & solenoid valve - is diode protection necessary? pitacco 2
Airlink servers- Dynamic IP service down AgMet 0
FTPClient Data From Table Thoriq 5
4-20ma.sensor with cr1000x chalit 10
CR800 logger Question WRc_PS 1
obtain Station Date/Time in seconds? mwebb 12
CR1000X measuring current from a 24V sensor anbo 1
FTP with CR800 Lucas13 1
Multiple Modbusmaster commands Anton 11
Problem data record - miss data lines and no skipped scan ? 1HZ Branzahm 4
Supply 5V with CR310 kokihualpa 1
DATA TYPE IN DNP3 hector001425 0
NAN response from serial connection with Vaisala PTB330 whoneyc 4
Use an IR100 infrared thermometer with a CR1000X logger LoggerDog 0
BMP5DIRECTSDK incl. Python? Makada 10
send files between two dataloggers com port iperez 1
Can the condition of a Flag be evaluated in an IF statement alackey 3