High-Speed Dynamic Applications
Designed for analog measurements
Overview
The Spectrum Spectral Analysis and High-Speed Input Module—available in three-channel or nine-channel variants—offers high-speed synchronous sampling for analog inputs, with dedicated analog input hardware that includes amplifiers, filters, and analog-to-digital converters (ADC).
Note: The Spectrum 109 version with nine channels will be coming soon.
Read MoreBenefits and Features
- Synchronization across multiple modules
- Ideal for three-axis accelerometers and strain gages
- Connection to data logger via EPI and CPI
- Streamlined creation of basic programs
- Sample rate up to 10 kHz
Technical Description
The Spectrum 103 (three channels) and 109 (nine channels) share the same design, offering a variety of selectable input ranges on each channel.
Synchronization
Channels are digitized using a 32-bit ADC and offer channel-to-channel sampling synchronization within approximately ±10 ns.
When using the EPI bus for synchronization across multiple modules, module-to-module synchronization is achieved within approximately ±100 ns.
Three-Axis
Each Spectrum channel offers selectable input ranges: ±200 mV, ±1 V, ±5 V, and ±10 V. The Spectrum 103 and 109, providing three or nine input channels respectively, make them ideal for three-axis accelerometers and strain gages.
Connection via EPI and CPI
Spectrum modules connect to data loggers via EPI or CPI networks using standard Ethernet cables (CAT5e, CAT6, or higher). EPI networks are ideal for Spectrum applications. For smaller channel count setups, a single Spectrum is connected to a traditional CPI-enabled data logger, such as the CR6 or CR1000X.
Basic Programming
Short Cut software streamlines basic program creation for reading multiple Spectrum modules. It generates a wiring diagram and a CRBasic program for your data logger. For advanced processing or data management, you can further customize the CRBasic program.
Sample Rate
Program an anti-aliasing filter for sample rates up to 10 kHz and bandwidths up to 5 kHz.
Images
Compatibility
Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.
Dataloggers
| Product | Compatible | Note |
|---|---|---|
| CR1000Xe | Compatibility is limited to a 1 kHz maximum and requires OS version 4 or greater. Limited to one Spectrum on the CPI channel for speeds less than 1,000 Hz. | |
| CR6 | Compatibility is limited to a 1 kHz maximum and requires OS version 10 or greater. Limited to one Spectrum on the CPI channel for speeds less than 1,000 Hz. |
Miscellaneous
| Product | Compatible | Note |
|---|---|---|
| GRANITE 10 | This preferred option requires OS version 1 or greater. | |
| GRANITE 6 | Compatibility is limited to a 1 kHz maximum and requires OS version 1 or greater. | |
| GRANITE 9 | This preferred option requires OS version 1 or greater. |
Specifications
| Operating Temperature Range | -40° to +70°C |
| Storage Temperature | -55° to +85°C |
| IP Rating | IP20 |
| Humidity | 0 to 99% (non-condensing) |
| Number of Channels |
|
| Input Range | ±10000 mV, ±5000 mV, ±1000 mV, and ±200 mV |
| Common-Mode Input Voltage | ±15 Vdc |
| Absolute Maximum Input Voltage | ±16 Vdc |
| A/D Converters | 32-bit SAR ADCs |
| Measurement Accuracy @ 20°C |
±(0.04% of reading ±130 μV) Note: The accuracy specification does not include sensor error or measurement noise. |
| Input Resistance | 80 MΩ |
| Input Time Constant | 230 ns |
| Input Offset Current | 5 nA typical, maximum @ 50°C |
| Processor | Digital signal processor 32-bit with floating point units |
| Processor Speed | 400 MHz |
| Memory | 128 MB SRAM |
| Power Requirements | 10 to 30 Vdc voltage |
| Dimensions | 21.6 x 13.7 x 7.6 cm (8.5 x 5.4 x 3.0 in.); additional clearance required for cables and wires |
| Weight | 1.6 kg (3.53 lb) |
Resources and Links
Privacy Policy Update
We've updated our privacy policy. Learn More
Cookie Consent
Update your cookie preferences. Update Cookie Preferences